SystemD SysVinit Upstart runit OpenRC (UNIX.cafe)SystemD SysVinit Upstart runit OpenRC (UNIX.cafe)

In this howto, you’ll learn the very minimum needed commands you’d have to know in order to manage your system’s startup processes (services). Whether it was Systemd, SysV init, Upstart, runit or OpenRC.


First, please note that:

  • Whenever you see {SERVICE_NAME} it’s a variable and meant to be replaced with actual service name, like sshd, apache2, iptables .. etc.
  • Enabling a service, it means making a service automatically start at the boot process. And disabling a service means, not to automatically start it at the boot process.
  • All the following mentioned commands except for when listing the services or their status, are meant to be used as root or with sudo.

SystemDSysV initUpstartRunitOpenRC

systemd is an init system used in Linux distributions to bootstrap the user space and manage all processes subsequently, instead of the UNIX System V or Berkeley Software Distribution (BSD) init systems. It is published as free and open-source software under the terms of the GNU Lesser General Public License (LGPL) version 2.1 or later.[5] The software has as one of its main goals the unification of basic Linux configurations and service behaviors across all distributions.

Source: Wikipedia.

To list all services:

$ systemctl list-unit-files

To list failed services:

$ systemctl --failed

To start a service:

$ systemctl start {SERVICE_NAME}

To restart a service:

$ systemctl restart {SERVICE_NAME}

To enable a service:

$ systemctl enable {SERVICE_NAME}

To list running services status:

$ systemctl list-units

To list available services:

$ systemctl --all

To stop a service:

$ systemctl stop {SERVICE_NAME}

To get the status of a service:

$ systemctl status {SERVICE_NAME}

To disable a service:

$ systemctl disable {SERVICE_NAME}

If your distro provides some tools to manage the services, it’s highly recommended to use them instead of manually creating/removing the symlinks whenever you want to enable or disable a service. RedHat and Fedora used to have service and chkconfig, Debian and its based distros like Ubuntu had service and update-rc.d.


To list services:

Using service tool:

$ service --status-all

Note that, the output’s signs mean the following:

  • [ + ] – Services with this sign are currently running.
  • [ – ] – Services with this sign are not currently running.
  • [ ? ] – Services that do not have a status switch.

Using chkconfig tool:

$ chkconfig --all

Note that, you can even get more details on each {SERVICE_NAME} (e.g: $ chkconfig {SERVICE_NAME} --list).

Or, list them manually:

$ ls /etc/init.d/

To start a service:

Using service tool:

$ service {SERVICE_NAME} start

Or, start it manually:

$ /etc/init.d/{SERVICE_NAME} start

To stop a service:

Using service tool:

$ service {SERVICE_NAME} stop

Or, stop it manually:

$ /etc/init.d/{SERVICE_NAME} stop

To restart a service:

Using service tool:

$ service {SERVICE_NAME} restart

Or, restart it manually:

$ /etc/init.d/{SERVICE_NAME} restart

To get the status of a service:

Using service tool:

$ service {SERVICE_NAME} status

Or, get it manually:

$ /etc/init.d/{SERVICE_NAME} status

To enable a service:

Using update-rc.d tool:

$ update-rc.d {SERVICE_NAME} defaults

Or using symlinks (manually):

$ cd /etc/rc3.d
$ ln -s ../init.d/{SERVICE_NAME} S95{SERVICE_NAME}

Note that, the S95 is used to specify order. S01 will start before S02, and so on.
You may use /etc/rc2.d instead of /etc/rc3.d.

Using chkconfig tool:

$ chkconfig {SERVICE_NAME} on

And if you want to enable it on a specific runlevels, use the --level switch. For example:

$ chkconfig {SERVICE_NAME} on --level 3

To disable a service:

Using update-rc.d tool:

$ update-rc.d -f {SERVICE_NAME} remove

Note that, you will need to use the -f switch if the applications /etc/init.d start up file exists.

Or just remove the symlinks (manually):

$ rm /etc/rc3.d/*{SERVICE_NAME}

Or:

$ rm /etc/rc2.d/*{SERVICE_NAME}

Using chkconfig tool:

$ chkconfig {SERVICE_NAME} off

And if you want to disable it on a specific runlevels, use the --level switch. For example:

$ chkconfig {SERVICE_NAME} off --level 3

Upstart is an event-based replacement for the traditional init daemon – the method by which several Unix-like computer operating systems perform tasks when the computer is started. It was written by Scott James Remnant, a former employee of Canonical Ltd.

Source: Wikipedia

To list services:

$ initctl list

To start a service:

$ initctl start {SERVICE_NAME}

Or:

$ start {SERVICE_NAME}

To restart a service:

$ initctl restart {SERVICE_NAME}

Or:

$ restart {SERVICE_NAME}

To stop a service:

$ initctl stop {SERVICE_NAME}

Or:

$ stop {SERVICE_NAME}

To get the status of a service:

$ initctl status {SERVICE_NAME}

Or:

$ status {SERVICE_NAME}

To enable a service:

Usually, they’re enabled by default. But in case they’re not, or you’d like to change when they’re started and where they’re not, you’d need to modify the /etc/init/{SERVICE_NAME}.conf. Then add or modify the lines that start with start on and stop on. For example:

$ start on runlevel [23]
$ stop on runlevel [!23]

To disable a service:

$ echo manual | sudo tee /etc/init/{SERVICE_NAME}.override

Note that, where the stanza manual will stop Upstart from automatically loading the service on next boot. Any service with the .override ending will take precedence over the original service file. You will only be able to start the service manually afterwards. If you do not want this then simply delete the .override.

Or disable it manually. By modifying {SERVICE_NAME}.conf which is located under /etc/init/. Then comment out all lines that start with start on.

But, if you want to completely disable it, so that it’s not even startable, do:

$ mv /etc/init/{SERVICE_NAME}.conf /etc/init/{SERVICE_NAME}.conf.disabled

runit is an init scheme for Unix-like operating systems that initializes, supervises, and ends processes throughout the operating system. Runit is a reimplementation of the daemontools process supervision toolkit that runs on the Linux, Mac OS X, *BSD, and Solaris operating systems. Runit features parallelization of the start up of system services, which can speed up the boot time of the operating system.

Runit is an init daemon, so it is the direct or indirect ancestor of all other processes. It is the first process started during booting, and continues running until the system is shut down.

Source: Wikipedia

To list services:

To list all available services:

$ ls /etc/sv/

To list all enabled services:

$ ls /var/service/

To start a service:

$ sv up {SERVICE_NAME}

Or:

$ sv u {SERVICE_NAME}

To restart a service:

$ sv restart {SERVICE_NAME}

Or:

$ sv t {SERVICE_NAME}

To stop a service:

$ sv down {SERVICE_NAME}

Or:

$ sv d {SERVICE_NAME}

To get the status of a service:

$ sv status {SERVICE_NAME}

Or:

$ sv s {SERVICE_NAME}

To get the current status of all enabled services:

$ sv status /var/service/*

To enable a service:

$ ln -s /etc/sv/service_name /var/service/

You can even prevent an enabled service from starting automatically at the boot process, by creating an empty file called down under /etc/sv/{SERVICE_NAME}/. For example:

$ touch /etc/sv/{SERVICE_NAME}/down

To undo that, simply remove the down file. As the following:

$ rm -v /etc/sv/{SERVICE_NAME}/down

To disable a service:

$ rm /var/service/{SERVICE_NAME}

On Unix-like systems, OpenRC is a dependency-based init. Since 0.25 OpenRC includes openrc-init, which can replace /sbin/init.

OpenRC is the default init system of Gentoo, Alpine Linux and other Linux distributions, which means that the software packages and daemons of those distributions support it, coming with or using the available scripts. As well as Linux, OpenRC can also be used on several BSD systems. It was created by a NetBSD developer, who started the Gentoo/FreeBSD project. TrueOS, a FreeBSD based system is also using OpenRC as its default in its default configuration.


To list services:

$ rc-status

To list failed services:

$ rc-status --crashed

To list available services:

$ rc-update -v show

Or:

$ ls /etc/init.d/

To start a service:

$ rc-service {SERVICE_NAME} start

Or:

$ service {SERVICE_NAME} start

Or:

$ /etc/init.d/{SERVICE_NAME} start

To restart a service:

$ rc-service {SERVICE_NAME} restart

Or:

$ service {SERVICE_NAME} restart

Or:

$ /etc/init.d/{SERVICE_NAME} restart

To enable a service:

$ rc-update add {SERVICE_NAME}

To stop a service:

$ rc-service {SERVICE_NAME} stop

Or:

$ service {SERVICE_NAME} stop

Or:

$ /etc/init.d/{SERVICE_NAME} stop

To get the status of a service:

$ rc-service {SERVICE_NAME} status

Or:

$ service {SERVICE_NAME} status

Or:

$ /etc/init.d/{SERVICE_NAME} status

To disable a service:

$ rc-update del {SERVICE_NAME}

By DeaDSouL

A big fan of UNIX & Linux.. Who adores programming..

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.